 | OddMix BOOKS - CIRCUIT SIMULATOR |
Micro-CAP II Electronic Circuit Analysis Program Guide Manual
This is a hard to find Electronic Circuit Analysis Program is a requirement for designing circuits and systems. Circuit simulation usually devided into two major different groups; analog and digital circuits simulators. There is some overlap, but not much, as different device libraries are required for the SPICE engine. This is an Analog simulator, with many hundreds parts in its included components library. It has a lot of old parts models, but any new part can be added easily with the included tools.
Digital circuit design is a lot simpler and easier than analog design. Even though this program is written to run on a DOS PC platform, it works as well, or better under the more modern Windows operating systems. That is because the Windows 2000 XP and Vista - all the operating systems without the underlying DOS - emulate a DOS environment flawlessly. Of course with an ancient DOS the program works as well. The Schematic Editor is a highly intuitive program allows the designer to assemble his circuit on the Windows like grapical plane. The easiest way to draw neet looking, readable schematics. To try it out without breadboarding it, is like a miracle. A terrific time and parts saver.
Micro-CAP II has lots of useful generic and specific simulation information applicable for many occasions. The Schematic Editor, The Shape Editor, Transient Analysis, AC and DC Analysis, Fourier Analysis, Monte Carlo Analysis, Stepping, Device Models, Sample Circuits, Utilities, Index among other topics. First come first serve, only one available.
Digital circuit design is a lot simpler and easier than analog design. Even though this program is written to run on a DOS PC platform, it works as well, or better under the more modern Windows operating systems. That is because the Windows 2000 XP and Vista - all the operating systems without the underlying DOS - emulate a DOS environment flawlessly. Of course with an ancient DOS the program works as well. The Schematic Editor is a highly intuitive program allows the designer to assemble his circuit on the Windows like grapical plane. The easiest way to draw neet looking, readable schematics. To try it out without breadboarding it, is like a miracle. A terrific time and parts saver.
Micro-CAP II has lots of useful generic and specific simulation information applicable for many occasions. The Schematic Editor, The Shape Editor, Transient Analysis, AC and DC Analysis, Fourier Analysis, Monte Carlo Analysis, Stepping, Device Models, Sample Circuits, Utilities, Index among other topics. First come first serve, only one available.
![Micro-CAP II Electronic Circuit Analysis Program Guide Manual Technical SPICE Reference [5 KB]](px/tech_micro_cap_2.jpg) |
Features: • Micro-CAP II Electronic Circuit Analysis Program • Publisher: Spectrum Software 1987 • Version 3, Rev. B 432 Pages, Hard Cover • 2 Floppy Disk, Slip Case • 8 W x 9.25 H x 2.5 D [in] case approx. Contents: • The Schematic Editor - The Shape Editor • Transient Analysis - AC and DC Analysis • Fourier Analysis - Monte Carlo Analysis - Stepping • Device Models, Sample Circuits • Utilities - Index Notes: • Excellent condition • Price: $120 • One available • S/H included within continental US |
 |
• Only one item available unless otherwise indicated • Click the credit card pictures left to order • • E-Mails always answered unless return e-mail is blocked |
| Copyright © 2017 K Nagy - http://www.OddMix.com - All Rights Reserved Page Revised: 2015-05-10 - - Privacy Policy - Site Map - Support |  |