OddMix ELECTRIC MOTOR - DC PM |
Motor DC Permanent Magnet PM Low Voltage High Torque Assembly Brass Gear
This is a PM [Permanent Magnet], high torque DC motor assembly with an attached brass gear. This motor was made for a paper shredder but appears to be excellently suited for model railroad, car or a boat applications. The two millimeter diameter shaft has a seven toothed attached brass gear. The motor begins to rotate at 2.5 Volt while pulls a no load current around 0.3 Amperes. First come first serve. Only one available.
Features: • Motor DC Miniature PM High Torque • Motor begins to rotate: 1.5VDC • Motor current: approx. 0.3 Amp DC • Motor resistance: 10 Ohms - approx. • Plastic cover, 2 filter capacitors • Bronze sleeve bearings • Solder terminals wires attached • 7 tooth brass gear attached to shaft • Size: 28 Dia, 67 L with gear [mm] • Shaft Size: 2 mm Dia, 15 L [mm] • Weight: 92 Grams Notes: • Used • Price: $15 • One available • S/H included within continental US |
• Only one item available unless otherwise indicated • Click the credit card pictures left to order • • E-Mails always answered unless return e-mail is blocked |
Copyright © 2017 K Nagy - http://www.OddMix.com - All Rights Reserved Page Revised: 2017-04-05 - - Privacy Policy - Site Map - Support |