Motor Stepping Matsushita 39SH-29BAA 1.8 Degree Step 12 VDC Six Wire Precision

This is an all metal, miniature, precision quality stepping motor built with all ball bearings. It operates from 12 VDC with 1.8 degree step angle. Motor type No. is: 39SH-29BAA. The five millimeter diameter shaft is fourteen millimeter long and it has an aluminum cylinder attached. The motor has six color coded wire terminals terminated in a single six pin connector. This is one of the best made motor in the OddMix collection! Stepping motors make excellent low distortion, adjustable frequency sine wave generators when driven by a DC motor. First come first serve. Only one available.
Stepping Motor 1.8 Degree Step 12 VDC Six Wire Matsushita 39SH-29BAA Precision [7 KB]


Stepping Motor - Model: 39SH-29BAA
MFR: Matsushita Made in Japan
Step Angle: 1.8 Degrees
Voltage: 12 VDC
Motor Current: 75 Ohms, 0.15 A
Terminals - 6 color coded wires
Ball bearings
Size: 39 W, 39 H, 43.5 L [mm] (with shaft)
Shaft size: 5 dia, 14 L [mm] - with aluminum cylinder
Weight: 204 Grams


Used, excellent working condition
Price: $80 - Only one available
S/H included within continental US
Previous Page

Click to Order Only one item available unless otherwise indicated
Click the credit card pictures left to order
E-Mails always answered unless return e-mail is blocked
Copyright 2017 K Nagy - http://www.OddMix.com - All Rights Reserved
Page Revised: 2017-04-05 - - Privacy Policy - Site Map - Support